Arne's hoppers



​All Arne's Hopper trailers share these important features:
  • Available in Clam-shell/Windrow and Cross Gate designs.
  • Also available in Tandem and Triaxle models.
  • Our suspension frame consists of:
    • Suspension frame rails and cross members are fabricated using 3/16" material
    • Wide track axles providing superior weight distribution and improved stability.
    • Formed 8" channels are used between the suspension hangers for even greater frame rigidity.
  • Our tubular main frame design and material selection provides maximum strength while eliminating unnecessary weight.
  • Vertical stiffeners are formed into all slope sheets for increased rigidity.
  • Our oscillating king pin assembly uses rubber suspension bushings which have proven to last longer and are easily replaced.
  • All hopper gates have the ability of being locked in either the open or closed positions for Safety during maintenance or transport.
  • Features of the Clam-shell/Windrow Hopper include:
    • Large 51" x 101" gate maximum gate opening size.
    • Air cylinders being closed when gates are closed and trailer is traveling eliminates dust contamination of seals and abrasion of shaft by gravel.
    • Gate design provides maximum strength and great sealing characteristics.
    • Large 60 gal air tank for uninterrupted use of gates without jeopardizing trailer operation.
  • Features of the Cross Gate Hopper include:
    • Gates nearly vertical for easiest opening and closing.
    • Air cylinders being closed when gates are closed and trailer is traveling eliminates dust contamination of seals and abrasion of shaft by gravel.
    • Large mechanical advantage is achieved with lever system between cylinders and gates resulting in our "Close Under Load" system.
    • Dual 12 gal air tanks provide uninterrupted use of gates without jeopardizing trailer operation.
  • Features of the LXG Hopper include:
    • 36" Gate Opening, Full Open
    • Pin Open Gate Metering
    • Gate Override for Clean Out
    • Optional Individual Gate Controls
    • Triaxle Configuration Only
  • Gate limiters allow the operator to pre-select the gate opening size, ideal for spreading product.
  • All Arne's trailers are finished with Sherwin Williams paint products and carry a 5 year warranty.
  • Arne's Hoppers carry a 5 year warranty on the Main Frame Rails and a 3 year warranty on the Body.